Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Altadena, CA
Gate access control in Altadena means keypads, remotes, phone entry, card readers, and video intercoms wired into gates that sit on hillside lots and along streets that see Santa Ana winds over 60 mph. Older 1920s-to-1950s Craftsman bungalows and Spanish Colonial Revival homes often have ornamental wrought iron gates that were never built for modern automation, and post-Eaton Fire rebuilds are going up with all-new gate systems. We give you a written price before any work starts, and we document every adjustment with photos. Call (562) 267-0589 for a free estimate.
Why Altadena Homes Are Different
Altadena is unincorporated Los Angeles County, which means every permitted gate job runs through the LA County Department of Building and Safety, not a city hall. Contractors who work Pasadena or Sierra Madre and pull permits through the wrong portal in Altadena are working without jurisdiction, so we confirm parcel status with the county before starting any permitted work. The January 2025 Eaton Fire devastated large portions of the community, and rebuilds are now steering toward non-combustible steel and aluminum gates under county fire-hardening standards. The foothill location at the base of the San Gabriel Mountains puts extreme lateral stress on gate frames, hinge hardware, and sliding-gate track systems during wind events. Many of the original ornamental wrought iron gates on prewar homes are decades old and carry rust, failing welds, and hinge wear. Those conditions shape the work we do here every week.
Our Main Altadena Services
These three services cover most of what Altadena homeowners call us for, with each page written for the conditions we see in this community.
Gate Repair in Altadena
Wrought iron gates on Altadena’s older homes commonly show rust at the bottom rail, failing hinge welds, and sagging frames after years of exposure to dry foothill air and wind. Post-Eaton Fire properties need repair work done on gates that are still standing, often with county-approved materials. We repair what’s there rather than steering you toward replacement, and every repair gets a photo record and written price before work begins. Learn more about Gate Repair in Altadena.
Gate Installation in Altadena
New gate installation in Altadena now leans toward non-combustible steel and aluminum, driven by county fire-hardening standards after the 2025 Eaton Fire. Hillside lots and estate properties need careful measurement for slope and wind load, and we handle the permitting conversation with LA County before any post hole is dug. You get a written scope, written price, and photo documentation from start to finish. See Gate Installation in Altadena for what’s involved.
Gate Motor & Opener in Altadena
Wind-driven gate frames put a heavy load on motors and opener arms in this foothill corridor, and we service the motor already on your property rather than pushing a replacement. From LiftMaster to FAAC, BFT, Linear, and Viking, we can diagnose and repair what’s installed. A misaligned photo-eye or worn limit switch is a documented fix, not a mystery. Read more about Gate Motor & Opener in Altadena.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Altadena
Gate access control in Altadena gives you a way to let people in without walking to the gate, whether that’s a keypad code for a contractor, a phone entry system that rings a cell phone, or a card reader for a hillside estate. Older homes here were built long before this equipment existed, so almost every install involves retrofitting a 1920s to 1950s gate with new wiring, a new receiver, or a weatherized entry station. Wind, dust, and wildfire exposure all shorten the life of exposed readers and keypads in this location. This is a core part of our Gate Access Control work, and every job ends with a written record of what was installed and how it was set.
Keypad Entry
Signs you need it
The existing keypad works intermittently, or family members and delivery people have no way in without a remote.
What it costs in Altadena
Keypad entry hardware and installation in Altadena typically ranges from $400 to $900 depending on wiring access and whether a receiver is already present.
How we do it
We mount a weatherized keypad, wire it to the gate operator, program the codes, and photograph the finished install.
Phone Entry
Signs you need it
You want visitors to call your cell phone from the gate, or the current phone entry board no longer dials out.
What it costs in Altadena
Phone entry systems in Altadena typically run from $600 to $1,200 installed, depending on the controller and whether the gate already has a cellular connection.
How we do it
We replace the entry station and controller, program the dial-out numbers, test calls from the gate, and leave you a written configuration record.
Video Intercom
Signs you need it
You want to see and speak with someone at the gate before opening it, or the existing video feed is dead.
What it costs in Altadena
Video intercom systems in Altadena range from $900 to $1,800 installed, depending on camera resolution and whether an app interface is included.
How we do it
We mount the video station, wire it to the gate operator, configure the indoor monitor or app, and photograph every wiring point.
What Gate Access Control Costs in Altadena
| Item | Typical range in Altadena |
|---|---|
| Keypad entry (hardware + install) | $400 - $900 |
| Phone entry system (installed) | $600 - $1,200 |
| Video intercom (installed) | $900 - $1,800 |
Can you add a keypad to an existing gate operator in Altadena?
Yes. If the operator has an accessory input, we wire a new keypad into the existing board and program the codes. Most keypad retrofits in Altadena take under two hours. Call (562) 267-0589 for a written quote.
Do Altadena gate access installs need a county permit?
It depends on the scope. Replacing a keypad or receiver typically does not require a permit, but new wiring runs can. We confirm parcel status with LA County before any permitted work begins.
Gate Parts & Welding in Altadena
Gate parts and welding in Altadena means replacing the components that fail first on older ornamental gates: hinges, posts, rails, and rollers, plus the welding that keeps a heavy steel frame square. Many of the wrought iron gates here date from the 1920s through the 1950s and have rust scaling at weld points, and Santa Ana wind loads accelerate every crack. Post-Eaton Fire rebuilds often call for custom welded steel gates with county-compliant non-combustible materials. We keep common parts on the truck and do most repairs on the first visit. This is our Gate Parts & Welding specialty, and every weld is photographed before and after.
Hinge Replacement
Signs you need it
The gate sags, scrapes the pavement, or the hinge barrels show visible rust and play.
What it costs in Altadena
Hinge replacement in Altadena typically runs from $180 to $450 per hinge, including cutting out the old weld and finishing the new one.
How we do it
We support the gate, cut or unbolt the failed hinge, weld or bolt the new one, and photograph the final alignment.
Custom Welding
Signs you need it
There’s a crack in the frame, a broken picket, or a decorative element that has separated from the gate body.
What it costs in Altadena
Custom welding repair in Altadena ranges from $150 to $600 depending on the length of the crack and how much grinding and finishing is required.
How we do it
We grind the area clean, weld the crack, dress the joint, and photograph both sides before we leave.
What Gate Parts & Welding Costs in Altadena
| Item | Typical range in Altadena |
|---|---|
| Hinge replacement (per hinge) | $180 - $450 |
| Custom welding repair | $150 - $600 |
| Gate roller replacement (per set) | $220 - $500 |
Can you weld a cracked wrought iron gate without replacing the whole gate?
Yes, in most cases. If the surrounding metal is solid, we grind, weld, and dress the crack, and the gate is stronger at the repair than before. Call (562) 267-0589 to have us look at it.
Do you replace posts for sliding gates in Altadena?
Yes. Post replacement is common where wind load has loosened or bent the post, and we set the new post in concrete with the same written price and photo documentation as any other job.
Brands We Service in Altadena
We service FAAC, BFT, Linear, and Viking gate operators in Altadena, along with LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. We stock common parts for these brands on the truck, so many repairs are completed the same visit. See our brands for the full list.
Pricing for Gate Repair in Altadena, CA
| Service | Typical range in Altadena |
|---|---|
| Keypad entry (hardware + install) | $400 - $900 |
| Phone entry system (installed) | $600 - $1,200 |
| Video intercom (installed) | $900 - $1,800 |
| Hinge replacement (per hinge) | $180 - $450 |
| Post replacement | $350 - $800 |
| Custom welding repair | $150 - $600 |
| Gate roller replacement (per set) | $220 - $500 |
| Rail repair (sliding gate track) | $300 - $750 |
Prices in Altadena are shaped by hillside access, the age of the existing gate, and whether the job involves county permit review. Every price is written and handed to you before any work starts, and that price includes our photo record of the job.
Neighborhoods We Serve in Altadena
We work across Altadena, from the flatlands near Lake Avenue up into the hillside streets toward the San Gabriel Mountains. Local response is typically same day or next morning for non-emergency calls.
- Altadena Meadows
- President Streets
- La Vina
- The Meadows
- Altadena Country Club area
Service Area - Cities Near Altadena
Our crews serve Altadena and the surrounding communities, including Pasadena, CA, San Gabriel, CA, Alhambra, CA, and Arcadia, CA. If you’re in one of these cities, the same written pricing and photo documentation applies.
Serving Altadena, CA - Our Local Coverage Area
We’re based in the Altadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Altadena
For non-emergency calls, we typically arrive same day or the next morning. A live person answers the phone 24 hours a day, so you’ll always reach someone who can schedule your visit, not a voicemail menu.
Most repairs don’t. Replacing a hinge, welding a crack, or swapping a roller needs no permit. New installs and some wiring runs do, and we confirm parcel status with LA County before any permitted work begins in Altadena.
Yes. We service the equipment already on your property and don’t push replacements. The written estimate shows exactly what we found and what we’ll do, with no surprise line items.
Call (562) 267-0589 for a free estimate on any gate repair or access control work in Altadena. We’ll give you a written price before any work starts and leave you a photo record when we’re done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Altadena Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.