Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pasadena, CA
Gate access control in Pasadena usually means adding keypad entry, a phone-based system, or a card reader to an existing automated gate, often on a property where the original gate dates to the 1920s or 1930s. These jobs get complicated because Pasadena’s historic housing stock and summer heat punish electronics and wiring differently than most of Los Angeles County. Call (562) 267-0589 and a live person answers, day or night.
Why Pasadena Homes Are Different
Pasadena has more than 30 locally designated historic districts, including Bungalow Heaven and the estate corridors along Linda Vista Avenue. Gate work in those districts often has to satisfy the city’s Historic Preservation design guidelines, which means restored ornamental ironwork or period-appropriate wood rather than an off-the-shelf replacement. A contractor who only swaps modern hardware will stall out at the design-review stage. Beyond the rules, the housing stock itself is the issue: Craftsman bungalows and Period Revival estates built between 1905 and 1935 still have original decorative iron swing gates hung on brick, cast concrete, or cobblestone pilasters that have settled unevenly for nearly a century. Add Pasadena’s thermal pocket at the base of the San Gabriels, where summer days routinely pass 105°F, and Santa Ana winds funneled through mountain gaps, and you get circuit boards cooked early, rubber seals hardened, and swing gates knocked off plumb. The Raymond Fault runs through town too. We regularly find a gate that “won’t close flush” has healthy hinges and a healthy operator, but the original brick pilaster has racked from decades of microseismic movement. In Pasadena, the post is the problem more often than the motor.
Our Main Pasadena Services
Pasadena homeowners call us about three things most often: repairing gates that have failed in the heat or wind, replacing gates in historic districts where the design rules matter, and fixing or swapping operators on century-old posts. Each has its own dedicated Pasadena page.
Gate Repair in Pasadena
Gate repair in Pasadena frequently starts as a call about a gate that won’t close, a hinge that’s tearing free from a settled brick pilaster, or a welded seam that cracked during a Santa Ana event. We name what we found, quote the fix in writing before any tool comes off the truck, and leave a photo record of the adjustment or part. Gate Repair in Pasadena covers the full scope, from hinge resets to full frame straightening.
Gate Installation in Pasadena
New gate installation in Pasadena usually runs through the Historic Preservation review process, especially in districts like Bungalow Heaven. We work from the design guidelines rather than fighting them, and we tell you the price and the material before anything is ordered. Gate Installation in Pasadena walks through what the review process asks for.
Gate Motor & Opener in Pasadena
Operator failures in Pasadena skew toward heat: a motor or control board cooking through a 108°F stretch, a photo-eye that drifted out of alignment, or a swing arm bent by wind load on a tall decorative gate. We service nine major brands so the conversation starts with repair, not replacement. Gate Motor & Opener in Pasadena details the common failure patterns by brand.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Pasadena
Gate access control in Pasadena means adding or repairing the entry system on an automated gate: keypads, phone entry, card readers, or video intercoms mounted to century-old pilasters and wired through heat-stressed conduit. Homes from the 1905-1935 era were never built for low-voltage access wiring, so most Pasadena jobs involve careful routing through brick or stone rather than a clean new-build install. Our Gate Access Control service covers all of it, documented with a photo record on every visit.
Keypad Entry
Signs you need it
The keypad casing is cracked or sun-bleached from Pasadena heat, buttons work intermittently, or the code no longer holds after a power flicker.
What it costs in Pasadena
Keypad replacement or new install typically runs $240-$520, depending on whether the wiring path through an old brick pilaster needs to be re-routed.
How we do it
We pull the old unit off the pilaster, check the wire run and the operator’s open-command input, mount the new keypad with a sealed gasket, set and verify the code, then photograph the finished install and the wire terminations for your record.
Phone Entry
Signs you need it
Callers get no dial tone at the gate, the relay won’t trigger the operator, or the system works in the morning and dies in the afternoon heat.
What it costs in Pasadena
Phone entry system repair or replacement typically runs $380-$850, with the spread driven by whether the existing wiring through brick conduit can be reused.
How we do it
We test the relay output at the operator, check voltage through the cable run, replace or reprogram the unit, confirm the gate opens reliably from three test calls, and hand you a written record of every setting.
What Gate Access Control Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Keypad entry (new or replacement) | $240-$520 |
| Phone entry (repair or replacement) | $380-$850 |
| Card reader or video intercom | $420-$980 |
Can you install access control on a gate that’s already automated?
Yes. We tie the new keypad, phone unit, or card reader into the existing operator’s open-command terminals, so the motor itself usually doesn’t need to be touched. The price is written before we start. Call (562) 267-0589 for that written quote.
Does Pasadena require permits for gate access control work?
Low-voltage access control on an existing gate typically doesn’t trigger a building permit, but in Pasadena’s historic districts any visible change to the gate or pilaster can trigger design review. We tell you which applies before work begins. Call (562) 267-0589 and we’ll check your street’s status.
Gate Parts & Welding in Pasadena
Gate parts and welding in Pasadena often means the fabricated repair, not the off-the-shelf replacement: a hinge ear cracked at the weld, a bottom rail rusted thin from a century of sprinkler overspray, or a decorative iron finial snapped off a Bungalow Heaven gate. Up the hill from the Raymond Fault and downwind of every Santa Ana, Pasadena gates fail at their metalwork first. Our Gate Parts & Welding service covers replacement parts and mobile welding on the spot.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, the hinge pin is visibly worn or ovaled out, or the hinge plate is pulling away from a cracked brick pilaster.
What it costs in Pasadena
Hinge replacement typically runs $180-$420, more when the post itself must be repaired first so the new hinge has sound material to bolt into.
How we do it
We support the gate, cut or unbolt the old hinge, dress the mounting surface, weld or bolt the new hinge in place, and photograph the alignment before the gate is released.
Custom Welding
Signs you need it
You have a cracked rail, a snapped picket, or a torn gate frame where a standard replacement part doesn’t exist or won’t match the original ironwork.
What it costs in Pasadena
Custom welding repair typically runs $220-$650, depending on the length of the weld and whether the area needs to be heated and straightened first.
How we do it
We grind the crack clean, weld it with the gate braced and squared, treat the heat-affected zone, prime the repair against rust, and hand you a photo of the weld before and after grinding.
What Gate Parts & Welding Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Hinge replacement | $180-$420 |
| Custom welding repair | $220-$650 |
| Post replacement (steel post into existing footing) | $450-$900 |
Can you weld a gate without removing it from the property?
Most of the time, yes. Our welding rig comes to the gate, and we brace and square the gate in place before welding. The price covers the mobile setup. Call (562) 267-0589 for an exact quote.
My original iron gate is rusted through in one section. Do I replace the whole gate?
Not necessarily. If the surrounding frame is sound, we cut out the rotted section and weld in matched material, then prime and finish so the repair doesn’t shout. In historic districts that’s often the only path through design review. Call (562) 267-0589 and we’ll look at the gate before recommending anything.
Brands We Service in Pasadena
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common replacement boards and arms for FAAC, BFT, and Linear units are stocked locally where supply allows. See our brands for the full list and turnaround notes.
Pricing for Gate Repair in Pasadena, CA
| Service | Typical range in Pasadena |
|---|---|
| Gate repair (hinge, frame, general) | $180-$650 |
| Gate installation (new swing or slide gate) | $1,800-$6,500 |
| Gate motor / operator repair | $240-$850 |
| Gate motor / operator replacement | $980-$2,800 |
| Keypad entry (new or replacement) | $240-$520 |
| Phone entry (repair or replacement) | $380-$850 |
| Card reader or video intercom | $420-$980 |
| Hinge replacement | $180-$420 |
| Custom welding repair | $220-$650 |
| Post replacement (steel post into existing footing) | $450-$900 |
Prices move up in Pasadena when a historic-district design review applies, when a brick or cobblestone pilaster has to be rebuilt before any hardware can hold, or when heat-damaged wiring inside a century-old wall must be replaced rather than reused. Whatever the number, it’s written down and handed to you before any work starts.
Neighborhoods We Serve in Pasadena
We cover all of Pasadena, with regular work in the neighborhoods below. Response for most non-emergency calls is within one business day across the city, often same day when a technician is already nearby.
- Bungalow Heaven
- Linda Vista
- Oak Knoll
- Madison Heights
- San Rafael
Service Area - Cities Near Pasadena
We also serve the communities directly around Pasadena, including Altadena, CA, San Gabriel, CA, Alhambra, CA, and Temple City, CA. Scheduling is coordinated from our Los Angeles office, with crews dispatched into Pasadena daily.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pasadena
Most Pasadena calls get a technician the same day or next business day. Emergency work, like a gate stuck open on a driveway, goes to the nearest available crew. Call (562) 267-0589 and you’ll reach a live person who can tell you the current schedule, not a recorded line.
Routine repairs and part swaps usually don’t need a building permit. In designated historic districts, however, visible changes to the gate or its supporting posts can require design review through the Historic Preservation office. We’ll tell you what your street triggers before any work begins.
We check the recorded easement and confirm which owner or HOA is responsible for the gate before scheduling the work. That keeps the job from stalling halfway through. Call (562) 267-0589 with the address and we’ll sort out the responsibility chain first.
If your Pasadena gate is failing, call (562) 267-0589 for a free estimate. We’ll quote the work in writing, on site, before anything is picked up or switched on.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.